Raw Material Suppliers

Electro Abrasives Corp.
701 Willet Road
Buffalo, NY 14218
Phone: (716) 822-2500;     1-800-284-4748
Fax:     (716) 822-2858
E-mail: info@electroabrasives.com
Website: www.electroabrasives.com

Manufactures the following at our SPC controlled Buffalo facilities:
A. Black Silicon Carbide #1 Refractory

• Splits (98.5% typical) 6/F, 10/F, etc. cut into custom sizes or 6/8, 8/16, 16/35, 35/70, 80/F, 100/F, 200/F
• Water Washed Fines 270/F, 800/F-W, 900/F-W, 1200/F-W, 2.5 micron
• Dust Collector Fines 200/F (CR, CT, CTC)
• F320-W, 360-W, 400-W, 500-W, 600-W, 800-W, 1000-W, 1200-W

B. Green Silicon Carbide Powders water classified in our Green Facilities

• Fine splits 400/500, 500/600, etc.
• Water washed Fines 800/F-W, 1200/F-W
• F320-W, 360-W, 400-W, 500-W, 600-W, 800-W, 1000-W, 1200-W, 2 micron, 1200/F-W

C. Boron Carbide grains and Water Classified Powders made in our Boron Carbide Plant

• -200 mesh
• -400 mesh
• -10 microns, 2 microns
• F100, F120, 150, 180, F220, 240, 280, F320-W, 360-W, 400-W, 500-W, 600-W, 800-W, 1000-W, 1200-W

We are committed to continual improvement and superior service.

Management:
Kristine Ramming, President & CEO
James R. Kintzel, Plant Manager
Cindy Ryniec, Customer Service Manager
Robert Mesanovic, Plant Superintendent & Engineer
Charles Hubbard, Quality Control Manager & Quality Assurance Engineer
Robert Christensen, Regional Sales Engineer

Plant Locations: Buffalo, NY

Research Locations: Buffalo, NY

Laboratory Locations: Buffalo, NY

Sales Locations: Houston, TX; Los Angeles, CA

TYPES OF PRODUCTS: